that’s nice. is that a print on griptape? or how was that graphic implemented?
2 Likes
It’s not really on the deck. It floats above it. .
1 Like
photoshop?
2 Likes
Voodoo man, voodoo
1 Like
🖼️ All the Pictures and Nothing of the Else - #380 by RafaelinMissouri
May I ask which size chains you are using?
Looks like 05b isch.
Did you have had any issues with them so far?
I run 06b chains, but consider to change to 05b on my jump board to save some weight.
Just not sure if that’s a good idea.
2 Likes
A friend of mine did the artwork, you can find his work here https://www.mugwortdesigns.com/
And yeah, had it printed to grip tape
6 Likes
Love it.
5 Likes
Hey Andy.
These are #25 chains.
I have been running them in this board for about a year.
Zero issues.
I don’t ride very aggressively or do jumps.
But since this board became the tow truck they pull a lot of weight.
113kg for me + 36kg for the kid and trailer so.
5 Likes
If my international translation didn’t fail 
this is just a bit bigger then the 04b sprocket size.
So guess I will give it a go with the 05b.
The only problem I have to solve now, is how to get motor sprockets with 10mm bore. The ones I can get locally are all 6mm only.
2 Likes
Ohhhh.
Yeah. I have done 12, 11, 10, and 9 teeth. But all were for 8mm shafts.
Some came as 5/8 inch bore and I drilled out a tiny bit.
1 Like
I found 10T with 8mm bore, that could work, or I will just need to bother the UK guys to reship me some sprockets from gearsandsprockets.co.uk
They offer different bore sizes for most of the sprockets they sell.
2 Likes
I could buy some shafts from these guys so if you want to place an order lmk
1 Like
Just have seen they do have a Holliday till 4th of January. So I will have some days to think about it.
Thx for the offer. I will come back to it very likely
try the pinky 
7 Likes
Fuckin dying over here 
5 Likes
I sent him an email this morning to see if he was still alive.
9 Likes