That’s looking 
!
I dig the thicker grip, looks similar to the mini’s girth.
4 Likes
Dayum!! +1 for this as the winner(with the 21700). How do we get in line for one of the pcbs to build one?
5 Likes
Good point brought up by @Radium
Does the design have a mechanical stop for the limits of the throttle wheel?
3 Likes
yes.It uses the parts from the remote mounted to the new PCB. You just dont need the battery bracket.
3 Likes
I will send you one
4 Likes
Here is the backside of the trigger assembly. It uses the Hoyt parts, so the stops are the exact same. Easy peasy
3 Likes
Legend man. You have seriously hit it out of the park with this one!
6 Likes
ok bitches, its on github. I am an idiot for not figuring this out sooner.
9 Likes
Nice. Will print today to get a feel.
4 Likes
Cool. Let me know it goes.
The edges of the grip body at the interface to the lid don’t always come out that great since they are overhangs. Might have come up with something different there to get a clean closure.
2 Likes
Have you thought about including a trigger guard?
My thoughts on a trigger guard were for it to be an interlocking individual piece that could easily be replaced if the casing was split down the middle vertically.
Might not be as easily achievable here…
1 Like
I’d like to try. That’s like level 3 with the forms feature and I’m still on level 1. Also need to design a proper trigger (or steal one)
1 Like
Splitting the case is doable, but the have three pieces? Lid and two sides?
5 Likes
And trigger guard. So 4 pieces
2 Likes
I’m working on the trigger design first and the guard integrated into the grip. Then I can make it removable and split the grip in two. I got a path for this.
Testing out a trigger. Fucking spring is gone. Launched into space. Full throttle hits the case before the stop so I need a slight adjustment
9 Likes
I just noticed the fine print, where would we put it?
2 Likes
Underneath maybe?
2 Likes
If you’re in to the idea, I think bottom is the most useful for aiming it and not looking like a gun.
2 Likes