Reply to "🖼️ All the Pictures and Nothing of the Else"

malJohann · September 3, 2020, 10:14pm

…and you esk8 through it (by accident).

malJohann · September 3, 2020, 11:23pm

So you’re going to be using Littelfuse Midi like the Stormcores now?

malJohann · September 3, 2020, 11:24pm

Somehow never thought of you as a Boosted guy.

Andy87 · September 4, 2020, 4:09am

The board that brought me into DIY and the only board that is always working
I still enjoy to ride it from time to time when I’m out with my gf. Slowly, but still faster than our rental escooter also a nice beginner board for my gf. Still hope I can get her into e mtb one day

mackann · September 4, 2020, 5:51am

Stormcore dont have any fuse? Only a pcb fuse for voltage output from what I know.

We will use this fuses instead of the ones on test pcb:
Discharge :

Charge:

bd7dfd399fc091f2bb65617d40bf1cf2bad5ed21

Nacho · September 4, 2020, 5:28pm

@Abusfullofnuns

How long did it take to get like that

Abusfullofnuns · September 4, 2020, 6:56pm

Around 350 miles on the front and about 100 on the rear.

Probably acceptable for miles

The ripping of the sidewall is what surprised me. Heel side inside only.

Wandagoner · September 4, 2020, 7:54pm

Joe what happened to the velcro strapy battery bag you had made in southern california?

Andrew · September 4, 2020, 8:21pm

Love it. Front half-binding is awesome for carvers. I ran an F5 up front on my KalyKat build for awhile. About to do the same for LC.

Saturn · September 4, 2020, 8:36pm

I’m not using those batteries anymore. It’s in the drawer should I ever use lipos on this deck again.

malJohann · September 4, 2020, 9:01pm

My LaCroix AS/switch for the dual 100S has this exact fuse, came with a 60A which I upgraded to a 100A. I assumed the 100D integrated AS/switch was also fused similarly.

Wandagoner · September 5, 2020, 12:22am

ignore this, i’m doing some testing

Nacho · September 5, 2020, 2:09am

Is that the hummie? Shred lights?

Venom121212 · September 5, 2020, 2:45am

Yes hummie, no shredlights. It’s a bright ass flashlight mounted to the top of the trucks.

Scepterr · September 5, 2020, 4:04am

that’s a pretty wobble friendly stance you got there…

Venom121212 · September 5, 2020, 2:09pm

Nope.

BillGordon · September 5, 2020, 3:13pm

Please don’t do this with Icebreaker. The effects of the world spinning in the opposite direction could be cataclysmic.

whaddys · September 5, 2020, 4:43pm

@glyphiks

k00k · September 5, 2020, 6:48pm

Interesting… share the knowledge brother

rosco · September 5, 2020, 7:22pm

Was recommended by local composite supplier, so I bought some (for science).

Basically a thick fabric mat that you can use like a core. It gets impregnated with resin in the layup so has good adhesion to the structural layers of a part. And has good shear strength.

Used for boat hulls and bulkheads.

Because it’s soft, it can roll out over curved mould surfaces and doesn’t need to be formed to match a curved mould shape at all (just cut with scissors)

I got a 10mm thick version, won’t use it for a while but will share results when I get onto it.